Pitney Bowes RISO ComColor Printer - Manual (Page 26)

24
If you want to send data from a computer to print on this
machine, you must first install the printer driver onto the
computer. Install by following the procedure below.
Installing the Printer Driver
• Log in as a user with administrator privilege.
• Close all active applications.
• For instructions regarding uninstallation, using the setup maker and the quick installer, ask your administrator.
1
Load the included CD-ROM in the computer’s CD-
ROM drive.
The installation wizard automatically starts up. If the
installation wizard does not start up, double-click the file
“Install.exe” on the CD-ROM.
2
Select [English] in the pull-down menu and click
[OK].
3
Click [Next].
4
In [Search result list], select printer information
about the machine, and then click [Next].
Printer searching is possible only in IPv4. If you are using
IPv6, enter the IP address.
5
Select the printer name for the machine and click
[Next].
If the selected driver is already installed, the [Procedure of
installation] screen is displayed. In this case, click [Next].
6
Click [Next].
7
Click [Install].
Installation now begins.
ComColor Series Basic Guide 02