Pitney Bowes RISO ComColor Printer - Manual (Page 102)

100
Workflow
Install the barcode
application (Only for
the first time) Use the barcode
application (Create a
barcode area definition file) Register a barcode area
definition file you have
created to the printer driver
Print out the
barcode
Installing the Barcode Application
• Log on as a user with administrator privilege.
• Close all active applications.
1
Load the included RISO Printer Driver CD-ROM in the
computer’s CD-ROM drive.
2
Open the [Barcode Area DefinitionSoftware] folder
in the CD-ROM and double-click the “Setup.exe” file.
3
Select [English] in the pull-down menu and click
[OK].
4
Click [Next].
5
Select [I accept the terms in license agreement] and
click [Next].
6
Check the installation destination and click [Next].
To change the installation destination, Click [Change] and
select the destination in the [Change destination folder]
screen.
The “barcode application” this section describes is ComColor
9150/9110/7150/7110/3150/3110 series application software
that specifies the location information of barcode print
position to create a
barcode suitable
to read.
The barcode
application creates
a “barcode area
definition file (CSV
format)” to register
to the printer
driver.
About the Barcode
Application
ComColor Series Basic Guide 02