LINK Systems System 1100 Tonnage Monitor - Manual (Page 25)

OPERATION
___________________________________________________________________
2-14
Figure 5. Recalling a Setup.
2.5.3 REMOVE
The Remove menu allows the user to erase stored job setups from
backup memory. The Remove menu is shown below.
2.5.3.1 ENTER JOB#
The ENTER JOB# screen allows the operator to directly enter the
number of the job to remove from backup memory. The ENTER JOB#
screen is shown below.
The six digit job number is entered by the operator using the
ENTER JOB NUMBER TO
REMOVE: ______
REMOVE $ ENTER JOB# $
MENU $ SELECT JOB $ 9