LINK Systems System 1100 Tonnage Monitor - Manual (Page 24)

OPERATION
___________________________________________________________________
2-13
2.5.2.2 ENTER JOB#
The ENTER JOB# screen allows the operator to directly enter the
number of job to recall. The ENTER JOB# screen is shown below.
The six digit job number is entered by the operator using the
numeric keypad. When the operator presses the ENTER key after
keying in the job number, the System 1100 searches the backup
memory for the requested job and recalls it if it is found. If the
requested job is not present in backup memory a message indicating
so will be displayed.
2.5.2.1 SELECT JOB
The SELECT JOB screen allows the operator to search through a list
of all jobs stored in backup memory and select from that list a job
to recall. A typical SELECT JOB screen and list of jobs is shown
below.
The operator can use the up and down arrow keys to move through the
list of jobs. When the operator presses the ENTER key the System
1100 recalls the job currently shown on the LCD display.
ENTER JOB NUMBER TO
RECALL: ______
JOB NUMBER: 000001
(X32-0786 ) 9
JOB NUMBER: 000012
(Q45-REV01 )
JOB NUMBER: 000003
(HUB-CAP )
JOB NUMBER: 000025
(LATCH01 )