LINK Systems System 1100 Tonnage Monitor - Manual (Page 23)

OPERATION
___________________________________________________________________
2-12
Figure 4. Storing a Setup.
To store the current setup over the setup already in backup memory
press the YES key, otherwise press the NO key or the EXIT key.
At the conclusion of a successful job storage operation, the screen
below will be displayed.
NOTE: Although setups are stored in the System 1100 the
operator is encouraged to keep written records of stored
setups. These records will be useful in recovering
setups accidently lost by operator error or in the event
of memory failure within the System 1100.
2.5.2 RECALL
The Recall menu allows the user to recall previously stored setups
from backup memory into the current setup. The Recall menu is
shown below.
JOB STORAGE DONE.
PRESS EXIT.
RECALL $ ENTER JOB# $
MENU $ SELECT JOB $ 9