Kipp&Zonen LOGBOX SD Data Logger User Manual
Page 9
9
6
HARDWARE
Mechanical solution of LOGBOX SD is based on single board design with minimal
dimensions and weight.
Fi
Outer dimensions 115mm (width), 90mm (height) a 50mm (depth) makes it suitable for
mobile applications, too. Connectors inside are located on left and right side, from the
bottom there are inputs for sensor cables. Thanks to clear layout the user can easily
connect relatively large number of sensors. For better access to input connections,
connectors are divided by three.
The mounting plate can be used to connect the LOGBOX SD to a mast of 40 mm or
smaller. Unused cable glands are closed with an inside plug. The user can mount extra
cable glands to support more cable entries.