Kipp&Zonen LOGBOX SD Data Logger User Manual
Page 21
21
Resolution can be set for 12 or 24 bits. 24bits resolution is used for low level signals. This
type of measurements takes longer time (approximately 1 second per measurement).
Input mode can be selected to unipolar or bipolar. Bipolar mode is mostly selected for 24 bit
differential resolution.
Input voltage range is selected for 24 bit resolution only and can be selected from one of
eight available ranges.
For each input one of eight polynomials can be selected for calculation to engineering units.
None can be selected as well. Please, note that eight polynomials are common for all analog
and digital units.