Kipp&Zonen LOGBOX SD Data Logger User Manual
Page 25
25
11.6 Sensor configuration. (Digital)
In the Digital window you can enable and configure the parameters for the digital inputs.
The Digital input, which should be active, must be checked.
Important: The CSD 3 sunshine duration output can only be used on DIN3.
Next, it is possible to setup type of input measured (time, frequency or counter).
For each input one of eight polynomials can be selected for calculation to engineering units.
None can be selected as well. Please, note that eight polynomials are common for all analog
and digital units.