Kipp&Zonen LOGBOX SD Data Logger User Manual
Page 24
24
11.5 Logging options.
In the logging window the logging period can be selected in the range of 10 seconds up to
1hour.
Sensor start-up delay can be selected in the range from 0 seconds up to 9 seconds.
Memory management (for the internal memory of 128 kB) has the following options: circular
(after the memory is full, the oldest data will be over written) or on-stop (after all memory is
used, new data will no longer be stored in memory, even though the measurements will be
performed). Important: When using the SD card the logging to memory should be set to
Circular. Otherwise the logging stops after the (internal) memory is full.