EXFO FG-750 - Manual (Page 309)

Troubleshooting
Fiber Guardian 295
Connecting to Your Unit Using the KMV Remote Console
Connecting to Your Unit Using the KMV
Remote Console
Most of the configuration and monitoring tasks on your FG-750 unit can be
performed via the Host Web UI. However, you may need to access your
unit directly in certain cases such as advanced troubleshooting or when
you need to install a VPN client.
For a complete list of supported Web browsers, see Supported Web
Browsers on page 12.
To connect to your unit using the KVM remote console:
1. Ensure that your computer is equipped with Java 6 or later. If it is not
the case, install it on your computer ( www.java.com ) first.
2. Connect to the Host Web UI. For more information, see Accessing and
Exiting the Host Web UI on page 87.
3. From the main menu, select Status > System Information.
I
MPORTANT
You cannot access the KVM remote console via a WAN or the
Internet. You must either use a portable computer (DHCP adapter)
connected to the front port of the unit, or a computer connected to
a same LAN as the unit.