Main features – EXFO FG-750 User Manual
Page 16
![background image](/manuals/736510/16/background.png)
Introducing the FG-750 Fiber Guardian
2
FG-750
Main Features
Main Features
Your unit includes the following:
Stand-alone capabilities
A main CPU (host), and a BMC (baseboard management controller) as
a secondary controller unit (companion)
OTDR measurement
One node OTDR module (not present in Fiber Guardian remote OTAUs
[optical test access units])
Optional built-in (first stage) or cassette switches (second stage)
Possibility to connect external switches (remote OTAUs) for second
and third stage switching capability
Two USB 2.0 ports (host)
Two Ethernet ports - local access and LAN/WAN connection
Optional integrated communication module and external antenna for
3G/4G access (to take over automatically when the wired network is
down, or to be used as primary network)
Installation in a rack (rack mounting brackets, front drawer for access
to key parts and modules, and optional fiber management tray)
Optional TAM (test access module) kits to couple transmit/receive OLT
(optical line termination) port and test port to the line under test
Optional patch panels to switch from multifiber cabling to single-fiber
cabling without the WDMs (wavelength division multiplexers)
Access to configure settings via the Fiber Guardian Host Web UI
Ability to create a logical line based on the port numbers used, giving
them a unique name or ID through the Line Configuration Web UI
Open and fully documented API (REST interface) that enables you to
develop your own system-level network test and management solution