EXFO FG-750 - Manual (Page 127)

Setting Up Your RTU
Fiber Guardian 113
Detecting the Fibers Connected to the Optical Ports
To use Force Detection of fiber:
1. From the main menu, select Configuration > Remote Test Unit.
2. From the tree view, select the optical test head to which the optical
routes are connected.
3. Under OTAU, click Detect.
4. From the displayed dialog box, select
a wavelength.
5. Select the ports you want to use at
this wavelength.
Note: To quickly select or clear the check boxes,
use respectively Select All and Unselect
All.
6. Check Force Detection and click
Start to start the force detection of
the ports.
7. The forcibly detected ports will be outlined in red.
8. You can configure the ROTAU with the force detected fibers.