EXFO FG-750 - Manual (Page 166)

Operating Your RTU in OTDR Measuring Mode
152 FG-750
Managing Optical Routes
To add test setups:
1. From the main menu, select Configuration > Optical Routes.
2. From the tree view, click the icon that appears next to Test Setups.
3. Enter the parameters according to your needs.
4. Click Save to create the test setup or Cancel to discard them.
The application creates a Test Programs branch under the new test setup
automatically. You can add test programs from this branch.
Number of acquisitions
during a learning cycle
To start a new learning cycle To perform extra acquisitions when
the learning cycle is complete
To specify
which data
will be
transferred
to the
server (not
used with
stand-alone
RTU)
Test wavelength (fiber code is
indicated between parentheses)
Test setup name (mandatory)