EXFO FG-750 - Manual (Page 151)

Setting Up Your RTU
Fiber Guardian 137
Editing Test On Demand Default Parameters
Editing Test On Demand Default Parameters
The default input parameters for test on demand are listed on the Test On
Demand screen.
To edit test on demand parameters:
1. From the main menu, select Configuration > System Settings.
2. From the tree view, select Default Settings > Test Setup.
3. Select Test On Demand.
The Test On Demand page lists the parameters with their Factory
Setting values and Current Default values.
4. Click Edit corresponding to the parameter.
5. Enter the appropriate value.
6. Click Apply to update changes or Cancel to discard them.