EXFO FG-750 - Manual (Page 172)

Operating Your RTU in OTDR Measuring Mode
158 FG-750
Managing Optical Routes
To modify test programs:
1. From the main menu, select Configuration > Optical Routes.
2. From the tree view, select the route containing the test setup for which
you want to modify test programs.
3. From the tree view, expand the Test Setups branch.
4. From the tree view, select the test setup for which you want to modify
test programs.
5. From the tree view, under Test Programs, select the item to modify.
6. Click Edit.
7. Modify the parameters according to your needs.
8. Click Apply to update changes or Cancel to discard them.