EXFO EXpert VoIP Test Tools - Manual (Page 94)

Test Control
88 EXpert VoIP Test Tools
Report
Report
Config/Save Tab
The Config/Save tab allows to configure the report parameters and
generate/save the report.
Tap the Report button, and the Config/Save tab.
The report contains all information about the current test including its
setup and results.

Report Content parameters are used to identify the report and are not
mandatory. Up to 50 characters are allowed for each parameter.

Report Header could be the company name.

Report Title could be the name of the product, name of test, test
number, etc.
Restore Default reverts all parameters back to the default values.

Save Report

File Name is the name of the report to be generated. By default,
the name of the report will contain the name of the test, the date
(YY_MM_DD), and time (HH_MM_SS).

Media Selector is the media where the report file will be saved:
Internal Flash (default), or Removable Disk (USB). Removable
Disk (USB) is available only when there is a removable disk/key
connected to the EXFO’s platform USB port.

Display Report after Saving check box when selected (default)
automatically displays the report once it is generated.
Note: Once generated, the report can be opened from the Report - Open Tab on
page 89.