EXFO EXpert VoIP Test Tools - Manual (Page 26)

Test Setup
20 EXpert VoIP Test Tools
Interface
Interface
Note: The interface configuration parameters apply globally to all tests.
From the Main Menu, tap on a test and the Interface tab.
Test Interface

Test Interface displays the network adapter(s) found on the EXFO’s
platform. The first network adapter is selected by default.

Speed/Duplex selects the network adapter speed and duplex mode:
Auto Negotiation (default), 10 Mbit/s Half Duplex,
10 Mbit/s Full Duplex, 100 Mbit/s Half Duplex,
100 Mbit/s Full Duplex, 1000 Mbit/s Full Duplex. Changing this
setting restarts the network adapter, a user confirmation is required.
Obtain IP from DHCP
Obtain IP from DHCP check box when selected (default) allows to
dynamically obtain an IP address from a DHCP (Dynamic Host
Configuration Protocol) server for the Ethernet port.
VLAN Tagging
Allows to enable or disable VLAN Tagging. VLAN Tagging check box must
be selected (default) for all test tools at the exception of the VLAN Scan test
tool for which VLAN Tagging must be disabled.
Note: VLAN Tagging enable/disable will reboot the device. A warning pop-up
message is displayed. Press Yes to reboot the platform. The EXpert VoIP
Test Tools application has to be manually restarted after the platform’s
reboot.