EXFO EXpert VoIP Test Tools - Manual (Page 82)

Test Results
76 EXpert VoIP Test Tools
Summary (RTP)
Summary (RTP)
From the Tests menu, tap Results and the Summary tab.

Status displays the Status of the test. Once the test is completed, the
Pass/Fail verdict is displayed.

Running: test is running.

Stopped: test is interrupted; test is stopped before the set time.

Completed: test is completed successfully.

Message displays one of the following error messages when the test
fails.
DNS lookup failed.
No Response from Responder.
Responder unreachable.
Test Instance not created on Responder.
Connetion refused by Responder.
Incompatible version of test on running on
responder.
No UDP port available.
Responder Verifier stopped the test.
Invalid SrcIPAddr parameter.
No destination address received.
Error setting socket async option.
Error setting socket rcvpack option.
Wrong ssrc received.
Sequence number error.
Duplicate sequence number received.
Socket busy.
Invalid argument.
File table overflow.
Test results not within the Threshold range.
Resource temporarily unavailable.
Operation not supported on socket.
Software caused connection abort.
Can't assign requested address. Broken pipe.
Operation now in progress.
Operation already in progress.
Destination address required.
Wrong protcol type for socket.
Protocol not available.
Protocol not supported.
Address family not supported.
Address already in use.
Network is down.
Connection reset by peer.
No buffer space available.
Socket is already connected.
Socket is not connected.
Operation timed out.
Connection refused.
Write not completed.
Previous transmit not done.
Send operation timed out.
Interrupted system call.
No such device or address.
Bad file number.
Permission denied.
Bad address.