EXFO EXpert VoIP Test Tools - Manual (Page 20)

Selecting and Starting a Test
14 EXpert VoIP Test Tools
SIP
To select, configure, and start a SIP Test:
1. From the Main Menu, tap SIP.
2. From the Interface tab, configure the test interface parameters. See
Interface on page 20. Ensure that the link is up in the status bar before
proceeding to the next step.
3. From the Configuration tab, configure the SIP test. See Configuration
(SIP) on page 26.
4. From the Controller Setup tab, configure the controller settings. See
Controller Setup on page 42.
5. From the Responder Setup tab, configure the responder settings. See
Responder Setup on page 45.
6. From the Threshold tab, enable and configure the threshold values.
See Threshold on page 52.
7. Press Start to start the test.
8. For results, refer to Summary (SIP) on page 81, Call Details on page 54,
and Controller Statistics on page 65.
9. If required, tap the Report button to generate the report file of the
results and statistics. Refer to Report on page 88 for more information.