EXFO EXpert VoIP Test Tools - Manual (Page 47)

Test Setup
EXpert IP 41
Controller Setup
Controller Setup
Note: Only available when Controller is selected as the call mode (see Call Mode
on page 26).
From the Main Menu, tap SIP and the Controller Setup tab.
Controller Parameters

User Name is the name used for the SIP URL associated with the
Controller. A maximum 50 characters are allowed.

Signaling Port is the signaling port of the Controller: 1000 to 65535
(default is 5060).

Domain Name is the DNS name of the Controller, specified in either
DNS name format or IP address format. A maximum 60 characters are
allowed. If the DNS domain or IP address is specified, this value is used
as the host portion of the caller’s SIP URL, otherwise the IP address of
the caller is used.

Media Mode defines the flow direction of the RTP packets (media).

Send and Receive (default) specifies that the RTP packets flows in
both directions. For example, if Controller is set in Send and
receive media mode then it will send RTP Packets to Responder
and also it will receive the RTP packets from Responder.

Receive Only specifies that the RTP packets flows only in one
direction, i.e. from Responder to Controller.