EXFO EXpert VoIP Test Tools - Manual (Page 9)

EXpert IP 3
2 Getting Started
Signal Connection
The EXpert VoIP Test Tools uses the 10/100/1000 Mbit/s Ethernet RJ45 port
of the EXFO’s platform.
Connect the 10/100/1000 Mbit/s electrical signal to be tested to the RJ45
port of the EXFO’s platform.
Note: Refer to the EXFO’s platform User Guide for more information.
Laser Safety Information
The EXpert VoIP Test Tools software is not provided with any hardware
components. However, it may be used with your platform or modules
which may contain laser components. Refer to the user guides of your
platform or modules for further laser safety details and instructions.
Starting the EXpert VoIP Test Tools Application
The EXpert VoIP Test Tools application is pre-installed on the EXFO’s
platform. If the EXpert VoIP Test Tools is not already installed, refer to the
EXFO’s platform User Guide for more information on how to install the
application.
Note: The application can be used in trial mode if you do not have a valid license.
You can follow the on-screen instructions to activate the trial. If you wish to
renew the trial period or purchase a valid license, then refer to MyEXFO. For
information on how to install and activate software options, refer to the
EXFO’s platform User Guide.