EXFO EXpert VoIP Test Tools - Manual (Page 60)

Test Results
54 EXpert VoIP Test Tools
Call Details
Call Details
From the Tests menu, tap Results and the Call Details tab.
Test Results

Endpoint IP Address displays the IP Address of the endpoint device.

Peer URL displays the URL of the endpoint device.

Response is the method and response string of the last SIP message
received by the test.

Response Code is the SIP Response code that the destination returned
during the last SIP transaction.
Controller Results

No of Packets Sent indicates the number of packets sent to the
responder.

Round Trip Latency indicates respectively the length of time in
milliseconds for the minimum, maximum, and average round-trip
latency.
Call Setup and Termination Time (ms)

Option Response Time (ms) indicates the time in milliseconds to
complete the “Sip options” request method.
Note: The Option Response Time result is valid only, if SIP Options Request is
selected under Call Type in Call Information in the Configuration tab.

Initial Response Time (ms) indicates the time measured in
milliseconds from the initial SIP request message sent by the test until
the first response is received.

Call Termination Time (ms) indicates the length of time in
milliseconds to complete the call termination.