EXFO EXpert VoIP Test Tools - Manual (Page 53)

Test Setup
EXpert IP 47
Parameters (SCCP)
Parameters (SCCP)
From the Main Menu, tap SCCP and the Parameters tab.
Call Parameters

Call Manager IP Address/DNS allows to enter the IP Address or DNS of
the Call Manager. IP address can be in a dotted decimal notation (for
example, 192.168.34.5) or in a DNS name (for example, cm.acme.com)
format. A maximum of 56 characters are allowed.

Local MAC Address allows to enter the MAC Address associated with
the Callee as specified in the CallManager registration tables. This need
not be the Callee’s actual MAC address, nor the address of an actual
network device. However, it should have a valid MAC Address format.
The accepted range is from 00:00:00:00:00:00 to FF:FF:FF:FF:FF:FF.
The MAC Address must be unique across all tests using the same
CallManager.
Phone Type
Phone Type is the Phone Type that the answering endpoint will emulate:
12 S (default), 12 SP, 12 SP+, 30 SP+, 30 VIP, Cisco IP Phone 7910, Cisco
IP Phone 7935, Cisco IP Phone 7940, and Cisco IP Phone 7960.
Media Parameters
Media Mode defines the flow direction of the RTP packets (media).
Send and Receive specifies that the RTP packets will flow in both
directions. For example, if Controller is set in Send and receive media
mode then it will send (will send RTP as Audio Codec is selected) RTP
Packets to Responder and also it will receive the RTP packets from
Responder.