EXFO EXpert VoIP Test Tools - Manual (Page 52)

Test Setup
46 EXpert VoIP Test Tools
Responder Setup
Registration Parameters
Note: Available when Other Device is selected as Peer Device (see Peer Device
on page 26).

Register check box when selected (cleared by default) specifies that
the SIP-Responder will register with a SIP Proxy (or SIP Registrar -if
specified) during every test run.

Specify Registrar specifies SIP Registrar or Registration-Server. When
the Specify Registrar check box is selected (cleared by default), SIP
registration requests are accepted and processed by the specified SIP
Registrar.

Registrar IP Address/ DNS: Port: Enter the IP Address to register. If
enabled, the Responder attempts to register itself within the specified
registrar domain using the specified proxy server. If disabled, the
Responder does not attempt to register itself within the specified
registrar domain using the specified proxy server. When the Registrar
IP Address/ DNS: Port field is selected for editing using virtual keyboard,
the Presets button appears on the screen. Press the Presets button to
display the list of previously configured values. Select the desired value
from the list, if any. Maximum 60 characters are allowed.

Registration Interval (Sec): Enter the proxy registration refresh
interval in seconds. When the Registration Interval field is selected for
editing using virtual keyboard, the Presets button appears on the
screen. Press the Presets button to display the list of previously
configured values. Select the desired value from the list, if any. The
accepted range is from 1 to 65527 seconds. The default value is
3600 seconds.