EXFO EXpert VoIP Test Tools - Manual (Page 38)

Test Setup
32 EXpert VoIP Test Tools
Configuration (SCCP)

Codec selects the audio Codec (packet interval, payload size, and IP
bandwidth) of the call simulated by the Caller.
For Live Call media type: G.711 μlaw (default), and G.711 aLaw.
For Audio File media type: G.711 μlaw (default), G.711 aLaw, G729,
G.729A, G.729B, and G.729AB.
For Synthesized Media type: G.711 μlaw (default), G.711 aLaw, G.722,
G.723.1, G.726, G.728, G.729, G.729A, G.729B, and G.729AB.

SCCP DSCP
1
(SCCP Differentiated Services Code Point) describes a set
of end-to-end QoS (Quality of Service) capabilities. End-to-end QoS is
the ability of the network to deliver service required by the specific
network traffic from one end of the network to the other end. The
accepted range is from 0 (default) to 63.
Destination Information
Destination Phone Number is the phone number associated with the MAC
address for the Callee as specified in the CallManager registration tables.
This number is dialed by the Caller at the start of each test. The accepted
range is from 1 to 9999999999. Only available when Make Call is selected
as the call mode.
Note: The destination phone number must be assigned by the CallManager
administrator in order to ensure compliance with the network standard.
1. Not supported on FTB-2 and FTB-2 Pro.