EXFO EXpert VoIP Test Tools - Manual (Page 56)

Test Setup
50 EXpert VoIP Test Tools
Parameters (H.248/Megaco)
Parameters (H.248/Megaco)
From the Main Menu, tap H.248/Megaco and the Parameters tab.
Local Parameters

H.248 End Point Name allows to enter the H.248 End Point Name. The
End Point Name should be registered with the end point location (i.e.
IP address) and the phone number present in the Call Agent or Media
Gateway Controller. For example, if the End Point Name is registered
with the abc/1 and abd/1, then you can enter abc and abd in the H.248
End Point Name field. A maximum of 64 characters are allowed.

H.248 Gateway IP Address/DNS allows to enter the H.248 Gateway IP
Address/DNS name of the Media Gateway Controller or the Call Agent.
The Media Gateway Controller should be configured with the end point
name, end point location, and the end point phone number.
A maximum of 60 characters are allowed.