Echelon IzoT NodeBuilder - Manual (Page 61)

To test your device’s interface with the IzoT Browser, follow these steps:
1. Right-click the IzoT NB Example Device device in your IzoT CT drawing, then click Browse on
the shortcut menu.
2. The IzoT Browser opens. It displays the three functional blocks in your device interface (LED,
NodeObject, and Switch) and the network variables and configuration properties within each
functional block. You can only write values to the input network variables (blue) and writable
configuration properties (green).
3. Click the Monitor All button ( ) on the toolbar to start polling all values.
IzoT NodeBuilder FX User's Guide 47