Echelon IzoT NodeBuilder User Manual
Page 243

b. Drag the other end of the Connector shape to the input network variable of the other
functional block until it snaps into place and a square box appears around the end of the
Connector shape. There is a brief pause as the IzoT Commissioning tool updates the device
over the network.
Note: You can also create connections using the Connector tool (
) on the Visio Standard
toolbar or the Network Variable Connection dialog box. See Chapter 4 of the IzoT
Commissioning Tool User’s Guide for more information on creating connection using these
methods.
8. Monitor the values of the connected network variables. To do this, follow these steps:
a. Right-click an empty space in the LonMaker drawing and then select Enable Monitoring on
the shortcut menu.
IzoT NodeBuilder FX User's Guide
229