Moving to a specific point in the song – Akai MPC 2000xl User Manual
Page 97

Chapter 5: Song Mode
Page 86
Moving to a Specific Point in the Song
Select the
Now:
field with the CURSOR keys and set the point in the song that you want to go to
with the CURSOR keys and DATA wheel.
.......................................................
.....................................................................
................
................
................
INSERT
CONVRT DELETE
TEMPO:MAS
™:120.0
LOOP:OFF
Step
Sequence
Reps
1
01-Sequence01
1
2
01-Sequence01
1
Song:
01-Song01
Now:
001
.01.00
You can set the
Now:
field to display either bar/beat/clock or hours/minutes/seconds.
While still on the
Now:
field, press OPEN WINDOW.
........................
......................................................................................................
......................................................................................................... ............................
CLOSE
Time Display
Time Display
Display style:
BAR,BEAT,CLOCK
Start time:00h00m00s00f00
Frame rate:25
•
Display style:
Select either
BAR,BEAT,CLOCK
or
HOUR,MINUTE,SEC
.
•
Start time:
Select
HOUR,MINUTE,SEC
in
Display style:
to start the time display on the
main screen from the time set in this field. This is also the start time when synchronizing to
MTC or SMPTE time code.
•
Frame rate:
This sets the frame rate of the time code used when synchronizing to MTC or SMPTE time
code. Synchronization is described in the “MIDI/SYNC Mode” section.