Setting the program change transfer, Locating with the data wheel, Units used to locate a point – Akai MPC 2000xl User Manual

Page 67

Page 56

Chapter 3: Recording Sequences

Setting the Program Change Transfer

You can send program changes on each track in addition to sending program change events
within a track when a sequence is selected.

.......................................................

..................................................................................................

Sq:

01-(Sequence01)

TrMUTE

SOLO

Tr +

Now:001.01.00

STEP

EDIT

Tr -

™:120.0(MAS)

Timing:1/16

Tsig: 4/ 4

Count:OFF

Loop: ON

Bars: 2

Tr:01-Track-01

ON:YES

Pgm:

OFF

S:MIDI :10A-Device10

Velo%:100

Select the

Pgm:

field with the CURSOR key and set the program number you want to set with the

data wheel. The program change will not be sent if set to OFF.

To display the following window, select the

Pgm:

field and press OPEN WINDOW.

........................

......................................................................................................

....................................................................................................................................

Program change

Transmit program changes

in this track:

YES

Set the field to enable (YES) or disable (NO) the transfer of program change recorded on the
selected track. When this is set OFF, the program change will not be sent even if there is a
program change on the track.

Locating with the DATA Wheel

You can locate a point in the sequence with the DATA wheel.

.......................................................

..................................................................................................

Sq:

01-(Sequence01)

TrMUTE

SOLO

Tr +

STEP

EDIT

Tr -

™:120.0(MAS)

Timing:1/16

Tsig: 4/ 4

Count:OFF

Loop: ON

Bars: 2

Tr:01-Track-01

ON:YES

Pgm:OFF

S:MIDI :10A-Device10

Velo%:100

Now:

001

.01.00

To locate, select the

Now:

field with the CURSOR keys and increase or decrease the number

with the DATA wheel.

Units Used to Locate a Point

You can select bar/beat/clock or hours/minutes/seconds to be displayed in the

Now:

field.

Select the

Now:

field and press OPEN WINDOW.

........................

......................................................................................................

....................................................................................................................................

Time Display

Display style:

BAR,BEAT,CLOCK

start time:00h00m00s00f00

Frame rate:25