Next sequence function, Copying a sequence – Akai MPC 2000xl User Manual
Page 45

Page 34
Chapter 3: Recording Sequences
Next sequence function
When the cursor is in the
Sq:
field while a sequence is playing, you can select the sequence to
play next by rotating the DATA wheel. The following window appears when you rotate the DATA
wheel.
Pressing the NEXT SEQ key shows the following screen.
Select the sequence with the DATA wheel. In the above illustration, 02-Sequence02 is played
back after 01-Sequence01 is played to the end. It is possible to play sequences consecutively in
this manner. To stop the Next Sequence function select the number originally selected (the cur-
rently playing sequence in the
Next sq:
field) or press
CLEAR
[F5] to clear the entry.
Sq:
field
During the stop mode, the sequence that will be played back when the play key is pressed is
displayed.
During the playback mode, the sequence being played back is displayed.
Copying a Sequence
To open the Sequence window select the
Sq:
field and press OPEN WINDOW.
Press
COPY
[F5] to open the Copy Sequence window.
Select the sequence that you want to copy (top level) by pressing CURSOR UP and select the
sequence with the DATA wheel.
Select the copy destination (bottom level) by pressing CURSOR DOWN and select the sequence
you want to copy the da ta to with the DATA wheel.
The sequence data will be copied when you press
DO IT
[F5].
CAUTION:
If there is data in the sequence you have selected as the destination, the
data will be erased when you press
DO IT
. Be careful when you are
copying to a sequence with a name other than “Unused.”
When
PARAMS
[F3] is pressed, only the parameters will be copied to the selected sequence.
The sequence data will not be copied.
.......................................................
..................................................................................................
Sq:
01-(Sequence01)
TrMUTE
SOLO
Tr +
Now:001.01.00
STEP
EDIT
Tr -
™:120.0(MAS)
Timing:1/16
Tsig: 4/ 4
Tsig: 4/ 4
Count:OFF
Loop: ON
Loop: ON
Bars: 0
Bars: 0
Tr:01-(Unused)
ON:YES
Pgm:OFF
S:DRUM1:OFF
Velo%:100
........................
CLOSE
COPY
Sequence name:
Sequence name:
S
equence01
Default name:Sequence01
Default name:Sequence01
....................................................................................
DELETE
......................................................................................................
....................................................................................................................................
Sequence
........................
CANCEL
PARAMS
DO IT
Sq:
01-Sequence01
COPY
Sq:02-(Unused)
....................................................................................
........................................................................................ ............................
Copy Sequence
Copy Sequence
.......................................................
..................................................................................................
Sq:
01-(Sequence01)
TrMUTE
SOLO
Tr +
Now:001.01.00
Next Sq:
2
Tr -
™:120.0(MAS)
Timing:1/16
Tsig: 4/ 4
Count:OFF
Loop: OFF
Bars: 0
Tr:01-(Unused)
ON:YES
Pgm:OFF
S:DRUM1:OFF
Velo%:100
.......................................................
..................................................................................................
Sq:
01-Sequence01
SUDDEN
PAD
Now:001.01.00
CLEAR
™:120.0(MAS)
Timing:1/16
Next Sq:
02-Sequence02