Akai MPC 2000xl - Manual (Page 159)

Chapter 9: Effects
Page 148
Select X-OVER L&R in the Type: field of Delay/Echo window. This returns the feedback of
the stereo input signals after reversing the left and right channels. This produces an interesting
pan delay effect.
........................
......................................................................................................
............................ CLOSE MIXER SOLO BYPASS
DELAY/ECHO
Type: XOVER L&R XOVER L&R Feedback: 0% Feedback: 0%
Feedback delay:335ms Feedback delay:335ms
HF damping:20kHz
L/R delay offset: 0% L/R delay offset: 0%
Feedback: This adjusts the feedback volume.
Feedback delay: This adjusts the delay time between 0 and 335ms.
HF damping: This sets the high frequency contained in the sound within the feedback.
L/R delay offset: When this is set to any number other than 0, it produces a panning
delay effect. Set the ratio against time set in Feedback delay: field. When the value is
positive, the effect runs from right to left, when negative, the effect runs from left to right.
Select STEREO in the Type: field of Delay/Echo window. This produces a delay effect to both
the LEFT and RIGHT inputs.
........................
......................................................................................................
............................ CLOSE MIXER SOLO BYPASS
DELAY/ECHO
Type: STEREO Left Right
Feedback: 0% Feedback: 0% 0%
Feedback delay:335ms Feedback delay:335ms 335ms
HF damping:20kHz 20kHZ
Feedback: This adjusts the feedback volume. The feedback volume of both left and right can
be set individually.
Feedback Delay: This adjusts the delay time between 0 and 335ms. The delay time of
both left and right can be set individually.
HF damping: This sets the high frequency contained in the sound within the feedback group.
This can be set for left and right individually.