Editing the velocity – Akai MPC 2000xl User Manual

Page 66

Page 55

Chapter 3: Recording Sequences

Editing the Velocity

This adjusts the velocity of the data that is recorded on the selected track when the sequence is
played.

.......................................................

..................................................................................................

Sq:

01-(Sequence01)

TrMUTE

SOLO

Tr +

Now:001.01.00

STEP

EDIT

Tr -

™:120.0(MAS)

Timing:1/16

Tsig: 4/ 4

Count:OFF

Loop: ON

Bars: 2

Tr:01-Track-01

ON:YES

Pgm:OFF

S:MIDI :10A-Device10

Velo%:

100

Select the

Velo%:

field with the CURSOR keys and set the incremental or decremental ratio of

the velocity with the DATA wheel.

CAUTION: This setting will not directly edit the recorded data. The velocity will increase or

decrease according to the ratio set here only during playback. Also, data with a
maximum velocity (127) will not be affected by values set over 100%.

To edit the velocity of prerecorded data, use the Edit Velocity window.

To display the Edit Velocity window, select the

Velo%:

field and press OPEN WINDOW.

........................

......................................................................................................

....................................................................................................................................

DO IT

Edit Velocity

Edit type:

ADD VALUE

Value: 1

Time:001.01.00-001.01.00

Notes: 0 (C. )-127(G.8)

....................................................................................

To directly change the velocity of recorded data, set the following fields and press

DO IT

[F5].

•

Edit type:

Select the method of changing the velocity.

ADD VALUE

Adds the set

Value:

to the current velocity.

SUB VALUE

Subtracts the set

Value:

from the current velocity.

MULT VAL%

Increases or decreases the set

Value:

ratio (percentage) against the

current velocity.

SET TO VAL

Sets all of the velocity values uniformly to the set

Value:

•

Value:

Sets the value of the edit method selected in

Edit type:

•

Time:

Specifies the data range to be edited when the velocity of the recorded data is edited. Any
data not specified within this range will not be edited.

•

Notes:

Specifies the note range to be edited on the MIDI track when the velocity of recorded data
is edited. Any note not specified within this range will not be edited. On the Drum track,
notes can be entered by pressing the drum pads.