Akai MPC 2000xl - Manual (Page 105)

Chapter 6: Creating and Editing Sounds
Page 94
•
This displays the specifications of the currently selected sound. You cannot change the
value here.
Type: Displays stereo or monaural mode.
Rate: Displays the frequency of the sample.
Size: Displays the data size of the sound.
Deleting a Sound
To open the Sound window, select the Snd: field and press OPEN WINDOW.
Press DELETE [F2] to open the Delete Sound window.
........................................................................................ ............................
........................
CLOSE ALL
Snd: loop_1
Pressing DO IT will erase Pressing DO IT will erase
this sound !! this sound !!
.................................................................................... Delete Sound Delete Sound
DO IT
Select the sound you want to delete in the Snd: field and press DO IT [F5].
If you press ALL [F3], the following warning will appear. All the sounds can be erased when DO
IT [F5] is pressed.
........................................................................................ ............................
........................
CANCEL
Pressing DO IT will erase Pressing DO IT will erase
ALL sounds!!
.................................................................................... Delete ALL Sound Delete ALL Sound
DO IT
Copying a Sound
To open the Sound window, select the Snd: field and press OPEN WINDOW.
Press COPY [F5] to open the Copy Sound window.
Select the sound to be copied with the DATA wheel.
........................................................................................ ............................
........................
CANCEL
Snd: loop_1
New Name:loop_2
.................................................................................... Copy Sound
COPY
DO IT
Move to the New name: field with the CURSOR DOWN key and enter a name for the copy. Tap
a drum pad or rotate the DATA wheel to display the name window.
Press ENTER [F5] to save the new name.
Press DO IT [F5] to copy the sound.