Akai MPC 2000xl - Manual (Page 161)

Chapter 9: Effects
Page 150
Select REVERSE in the Type: field of Reverb window. The decay effect is reversed.
........................
......................................................................................................
............................ CLOSE MIXER SOLO BYPASS
REVERB
Type: REVERSE
Predelay:50ms
Time:50
Diffuse:90
Predelay: This adjusts the delay time from the generation of the sound to the start of the
reverb.
Time: This adjusts the time it takes for the reverb to dissolve.
Diffuse: This sets the density of the reflected sound of the reverb. When the value is low,
the echo effect is emphasized. When it is high you get a smoother effect.
Copying an Effect
Four sets of effect settings (MULTI FX1,2, REVERB1,2) can be saved for each program. The
settings of each set can be copied. The Copy Effect Settings Window will open by pressing OPEN
WINDOW when the Edit: field is selected on the FXedit screen.
........................
......................................................................................................
......................................................................................................... ............................ CLOSE
Copy Effect Settings Copy Effect Settings
Pgm: 1-NewPgm-A
Set:MULTI FX1 Set:MULTI FX1
Pgm: 1-NewPgm-A Pgm: 1-NewPgm-A
Set:MULTI FX1
Set:MULTI FX1
.................................................................................
COPY
Top Pgm: This selects the name of the program you want to copy.
Top Set: This selects the effect set of the copy origin.
Bottom Pgm: This selects the name of the program you want to copy.
Bottom Set: This selects the effect set of the copy destination.
Note: Note: Note: Note: Note: The reverb settings can only be copied when MULTI FX is the copy origin and RE-
VERB is selected as the copy destination or when the REVERB is the copy origin and
MULTI FX is selected as the copy destination.
Press DO IT [F5] to copy.