Fine adjustment of the end point – Akai MPC 2000xl User Manual
Page 111

Chapter 6: Creating and Editing Sounds
Page 100
Fine Adjustment of the End Point
Select the
End:
field and press OPEN WINDOW to open the End fine window.
........................
......................................................................................................
....................................................................................................................................
CLOSE
PLAY X
ZOOM+
ZOOM-
End fine
End fine
End:
440988
Lngth=
433129
Smpl Lngth:VARI
Smpl Lngth:VARI
PLAY X:ALL
PLAY X:ALL
•
End:
Set the end point. Change the value with the DATA wheel or enter a number with the
numeric pad and press ENTER.
•
Lngth=
The length of the sample (from the start point to the end point) is displayed. You cannot
change the value of this field.
•
Smpl lngth:
This sets a fixed point of either the end point or the length of the sample.
VARI
When the end point is changed, the start point remains fixed and the length
of the sample changes.
FIX
When the end point is changed, the length of the sample remains fixed and
the start point moves.
You can enlarge or reduce the sample wave display by pressing
ZOOM+
[F3] or
ZOOM-
[F2].
Press
ZOOM-
[F2] to display the entire wave and set a rough end point then press
ZOOM+
[F3]
several times to make fine adjustments.
When
PLAY X
[F6] is pressed, you can play back the currently selected sound at full velocity
according to the settings in the
PLAY X:
field. For details refer to the “TRIM Mode” section.