Midi sample dump, Sample dump setting, Receiving sample data – Akai MPC 2000xl User Manual

Page 194: Receiveing sample dump

Chapter 12: MIDI/SYNC Mode, OTHER Mode

Page 183

MIDI Sample Dump

Sound data can be transmitted and received between the MPC2000XL and external devices via
MIDI using the MIDI Sample Dump Standard Format.

Sample Dump Setting

Connect the MPC2000XL and external device with MIDI cables in the hand shake method (Con-
nect MIDI OUT of MPC2000XL to MIDI IN of the external device, and MIDI IN of MPC2000XL to
MIDI OUT of the external device). Hold down SHIFT and press MIDI/SYNC (9 on the numeric pad)
to display the MIDI/SYNC mode screen and press

DUMP

[F2] key.

DUMP

MIDIsw

REQUES

SEND

SYNC

..................................................... .......................................................

TRANSMIT

(Out:B)

Snd:
sound1

device ID: 0

RECEIVE

(In:

)

Receive ready while

Receive ready while
this page is open.

this page is open.

Request No.: 0

Receiving Sample Data

Selecting the MIDI Input/Output Terminals

Select the MIDI Input and Output terminals used for the connection with the external device in the

In:

and

Out:

fields respectively.

Setting the Device ID

Match the device ID number with that of the external device in the

Device ID:

field of the

TRANSMIT screen.

Selecting the Request Number

You can specify which sound to receive from the external device by selecting the sound number in
the

Request No.:

field. Please refer to the instruction manual of the external device for the

assignment of sounds and sound numbers.

Note: Not necessary to set if Request is not sent.

Receiveing Sample Dump

Sample Dump receive is started either by sending the sample data from the external device, or
sending the Sample Dump Request to the external device by pressing

REQUES

[F5]. While the

Sample Dump data is being received, the following message will appear.

CANCEL

Receiving.....