Edit mode, Fine adjustment of the end point of a zone – Akai MPC 2000xl User Manual

Page 115

Chapter 6: Creating and Editing Sounds

Page 104

Fine Adjustment of the End Point of a Zone

Select the

End:

field in the ZONE mode and press OPEN WINDOW to open the Zone end fine

window.

........................

......................................................................................................

....................................................................................................................................

PLAY X

ZOOM+

ZOOM-

Zone end fine

END:

55182

Lngth=

47326

PLAY X:ALL

•

End:

Set the end point. Change the value with the DATA wheel. You can enter large numbers by
entering a number with the numeric pad and then pressing ENTER.
You can also enter numbers with thw CURSOR LEFT/RIGHT keys while holding the SHIFT
key.

Note:

Note: If you adjust the end point, the start point of the next zone will also change.

•

Lngth=

The length of the zone (from the start point to the end point) is displayed. You cannot
change the value of this field.

You can enlarge or reduce the sample wave display by pressing

ZOOM+

[F3] or

ZOOM-

[F2].

Press

ZOOM-

[F2] to display the entire wave and set a rough start point then press

ZOOM+

[F3]

several times to make fine adjustments.

When

PLAY X

[F6] is pressed, you can play back the currently selected sound at full velocity

according to the settings in the

PLAY X:

field. For details refer to the “TRIM Mode”.

EDIT Mode

This allows you to edit the sample selected in the TRIM, LOOP or ZONE window.
From the TRIM, LOOP or ZONE screens, you can carry out various editing features by pressing

EDIT

[F5].

By turning the data wheel when the cursor is in the

Edit:

field, the following edit modes can be

selected.

◆

DISCARD

This discards the unused sounds before the start and after the end of the selected range.
Press

DO IT

[F5] to execute.

........................

......................................................................................................

....................................................................................................................................

CANCEL

DO IT

Section

Edit

Edit:

DISCARD

DO IT will discard.