Renaming a song – Akai MPC 2000xl User Manual
Page 90
Chapter 5: Song Mode
Page 79
Select the next sequence (assigned to Step 2), with the DATA wheel.
.......................................................
.....................................................................
................
................
................
Song:01-Song01
Now:003.01.00
INSERT
CONVRT DELETE
TEMPO:MAS
™:120.0
LOOP:OFF
Step
Sequence
Reps
1
01-Sequence01
1
2
02-Sequence02
1
(end of song)
(end of song)
In the same way as above, assign sequences and increase the number of steps.
Renaming a Song
To open the Song window, select the
Song:
field and press OPEN WINDOW.
........................
......................................................................................................
......................................................................................................... ............................
CLOSE
COPY
DELETE
SONG
Song name:
S
ong01
Default name :song
Default name :song
.................................................................................................
•
Song name:
Changes the name of the song.
Tap a drum pad or rotate the DATA wheel to display the name window.
Press ENTER after you have entered the name.
Note: If you do not press the ENTER key and move the
Default Name:
field or
other pages with the CURSOR DOWN key, the entered name will be ignored and
the name will not change.
•
Default name:
This sets the name that will automatically be used when data is entered into a new song
(titled “Unused”). Enter the name in the same way as for the Song name.