Toa VM-3000 Series - Manual (Page 91)

91
12.4. Setting the Terminating RM-300MF Unit
(RM-300MF: Switch 7 operation)
Set the DIP switch 7 located on the RM-200M's bottom surface to ON when connecting a single RM-300MF to
the VM-3240VA or VM-3360VA (no bridge connection to the RM-200M is made). (Default: OFF)
12.5. CPU OFF Function Enable/Disable Settings
(RM-300MF: Switch 8 operation)
Enables or disables CPU OFF function by the RM-300MF's front-mounted CPU ON/OFF switch.
Setting the DIP switch 8 located on the RM-300MF's side surface to ON enables CPU OFF function, and
setting it to OFF disables CPU OFF function. (Default: ON)
Note
For the CPU ON/OFF switch settings, refer to
"Making All-Zone Calls Using the CPU OFF Function" on page
47 .
12.6. Talk Key Settings
(RM-200M: Switch 4 operation)
Set the operating system of the RM-200M's front-mounted Talk key.
Setting the DIP switch 4 located on the RM-200M's side surface to ON enables announcement to be
broadcast while the Talk key is held down. Releasing the Talk key terminates the broadcast. (Press-To-Talk or
PTT mode)
Setting the DIP switch 4 to OFF enables a broadcast to initiate and pressing the key again terminates the
broadcast. (Lock mode)
(Default: ON)
12.7. Maintenance Mode
(RM-300MF: Switch 1 operation)
Not used.
Always set the DIP switch 1 located on the RM-300MF's bottom surface to the OFF position. (Default: OFF)
Note
If this switch is set to ON, the unit is placed in the maintenance mode and the RM-300MF's front-mounted
Communication Failure indicator lights green, causing the unit not to work.