Toa VR-1001B - Manual

The VR-1001B is a unidirectional paging microphone designed for use with the V-1000 series Mixer power
amplifier. It is equipped with a Push-to-talk (PTT) key, Speech and Chime indicators, and an output cable with
two 5-pin DIN plugs. When the VR-1001B is connected to a chime module, pressing the PTT key causes a
chime to sound (Chime indicator lights), then the microphone to turn on (Speech indicator lights).
VR-1001B PAGING MICROPHONE
INSTRUCTION MANUAL
3. CIRCUIT DIAGRAM 2. APPEARANCE
533-05-016-10
URL: http://www.toa.jp/
1. GENERAL DESCRIPTION
CHIME
5-pin DIN plug
Push to talk.
Shield
Body earth
1
1
4
4
2
2
5
5
3
3
SPEECH
Chime indicator
Speech indicator
5-pin DIN plugs
Push-to-talk key
Thank you for purchasing TOA's Paging Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
4. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
Type Moving-coil type
Polar Pattern Unidirectional
Impedance 600 Ω, Balanced
Output Level – 58 dB (1 kHz, 0 dB = 1 V/Pa)
Frequency Response 100 Hz to 10 kHz
Switch Push-to-talk key
Indicators Chime indicator : Red (LED)
Speech indicator : Green (LED)
Finish Microphone head : Zinc plated steel wire, gray, paint
Main unit : ABS resin, gray
Dimensions 100 (w) x 215 (h) x 150 (d) mm (3.94" x 8.46" x 5.91")
Weight 440 g (0.97 lb) (cable not included)