TeeJet SmartPad II User Guide - Manual (Page 132)

3-78 Chapter 3 - Real-Time Guidance
Lightbar Index
SmartPad II
Software Version 4.03
CenterLine Lightbar
Lightbar State Description
Mark A: Displayed when establishing the guidance point
A of the reference guideline.
Mark B: Displayed when establishing the guidance point
B of the reference guideline.
Swath #: A user selected lightbar message. When not
on the initial guideline the first character is either L or R
for Left and Right of the initial guideline. The number
identifies how many lines left or right of the initial guide-
line.
X-Track Error: A user defined lightbar message. This
cross track error message is displayed when the vehicle
is on the guideline and there is no error.
X-Track Error: A user defined lightbar message. In this
example the operator should steer to the left 2.3 ft.
(Assuming that System Units is set to US and Lightbar
is set to Swath mode.)
Ground Speed: A user defined lightbar message indicat-
ing the vehicle speed in Miles per Hour (MPH). System
Units is set to US.