TeeJet SmartPad II User Guide - Manual (Page 102)

3-48 Chapter 3 - Real-Time Guidance
The Parallel Guidance Mode
SmartPad II
Software Version 4.03
Turning On Applied Swath
The area covered by the vehicle during product application can be displayed at any time. To view the applied swath in
the view page, highlight the Applied Swath On/Off button and press . Typically the Applied Swath is turned on
when the vehicle is applying product. The initial guideline does not have to be established prior to turning on the
Applied Swath.
Exiting Real-Time Guidance
You can exit the real-time guidance process at any time. To exit the real-time process, press on the SmartPad II.
This will automatically highlight the exit button in the button bar. Once the exit button is highlighted press , this
will return you to the SmartPad II Main menu page, see Figure 3-64.
Figure 3-63: Turning Applied Swath On
Figure 3-64: Exiting Real-Time Swath Guidance