Potter PFC-9000 Series - Manual (Page 89)

89
PFC-9000 • 5403535 • REV G • 9/08
Dialer Test Messages
The following messages will display during the test processes of Lines #1 and #2. The messages that will appear
depend on the status of the dialer and the test results that are found.
The dialer is checking the line for voltage. This
message automatically displays when Manual
Test is selected.
No DC line voltage. The line is dead or no phone
line is connected or the phone line operates at
abnormal voltage.
The dialer is waiting for a dial tone.
This message may indicate a noisy telephone
line.
The dial tone was detected and telephone number
dialing is in process.
This message indicates that the dialer failed to
send a DTMF tone.
Waiting for availability of the receiver. The
receiver confirms the availability by sending an
Ack tone.
Dialer failed to detect Ack tone. This message
indicates that either the telephone number may be
wrong or the receiver is not available.
Sending events to the receiver.
Dialer idle now
No DC Volt
Waiting for Dialtone
Failed: No Dialtone
Dialing Receiver Now
No DTMF tone
Waiting for Acktone
Failed No Acktone
Reporting Event Now