Potter PFC-9000 Series - Manual (Page 69)

69
PFC-9000 • 5403535 • REV G • 9/08
The screen below shows how to add a circuit to Loop 0. The user will have to choose the type of circuit to add. The ZA-9008,
like the analog/addressable devices, can be one of a number of different types of inputs. In addition, when adding the circuit, the
user can automatically map the inputs to all of the existing signals, strobes and relays. The check box between the input type and
the message will allow the circuit to be silencable/deactivable. In addition, the message can be added per circuit. When all of the
modifications are made, click the add button. The Adding Conventional Circuit screen will refresh and the user can add the next
circuit. The devices will not display in the background until the screen is closed.
Deleting Adder Cards and Devices
If a device or adder card is incorrect or not needed it can easily be deleted. Click on the loop and device to be deleted. The adder
cards will bring up all of the added cards and the user must choose the device to be deleted. Under the Item Menu is the Delete,
select it and the software will ask for a confirmation before deleting any circuit or device.
Deleting a circuit adder card or device will remove it and all of the associated mapping to notification devices, relays etc. Once a
device is deleted, it cannot be undone or reverted.
Do not double click on the Add button because that will add two circuits to Loop 0.