Potter PFC-9000 Series User Manual

Page 26

PFC-9000 • 5403535 • REV G • 9/08

ZA-9008 Conventional Circuits Card
The ZA-9008 provides either eight Class B conventional circuits or four Class A conventional circuits in addition to the addresses

on the loop. The zones may be selected as a number of different input types as allowed in the Configuration Software. Any of the

conventional inputs may be correlated to any of the outputs. All field-wiring terminals are removeable for ease of wiring. The ZA-

9008 can be installed on top of the UDACT-9100 card in the left space, or in any available space from right to left.

The list for compatible devices is in Appendix C.

Jumpers
JW1

Jumper installed for Class A (Style D) initiation of Circuits 1 & 2

JW2

Jumper installed for Class A (Style D) initiation of Circuits 3 & 4

JW3

Jumper installed for Class A (Style D) initiation of Circuits 5 & 6

JW4

Jumper installed for Class A (Style D) initiation of Circuits 7 & 8

JW5

Continuity Jumper installed only if device is the last circuit adder installed

Plugs
P1

Data cable for next circuit adder

Data cable attached to previous circuit adder or main fire alarm

Power connector to next circuit adder

Power connector to P8 of fire alarm board or previous circuit adder module

FIELD

WIRING

TERMINAL

JW4

JW3

JW2

JW1

JW5

DWG# PFC-9000-17

Failure to use tested and listed compatible powered devices may result in system not operating or false activations.