Potter PFC-9000 Series - Manual (Page 45)

45
PFC-9000 • 5403535 • REV G • 9/08
When required to enter a pass code, press the queue buttons that correspond with the pass code. For example, the pass code of
0123 would be:
The default pass codes for each submenu are: Reports 0
Aux Bypass 0 (Auxiliary Bypass)
Device Bypass 1
Loop Bypass 1
Walk Test 1
Set After Hours 0
Clear Event Log 2
Clear Verif Count 2 (Clear Verification Count)
Auto Program 2
0 3 2 1
ALARM
QUEUE
SUPV.
QUEUE
TROUBLE
QUEUE
MONITOR
QUEUE
Nine submenus are accessed by scrolling down using the arrow keys. They are listed as follows:
1 Reports
2 Bypass
3 Walktest
4 Change Passcode
5 Day/night mode
6 Set Time/Date
7 Clear Event Log
8 Clr Verif Count (Clear Verification Count)
9 Auto Program
Pushing the INFO button with this screen will display the configuration software version.
Front Panel Overview
The PFC-9000 series panel has viewing and programming features incorporated into the Command Menu. The Command Menu
is accessed from the front panel utilizing the MENU button. Once the panel is powered up and operating, the Command Menu can
be accessed and the user can view or modify settings.
With the panel up and running, push the MENU button. This will access the Command Menu. The display will read:
-Command Menu –
1 Reports
2 Bypass
3 Walktest v
The “v” indicates that there are additional items below. The arrow keys allow the user to scroll up and down, left and right.
MENU
ENTER