KERN & SOHN ALT 250-4B - Manual (Page 82)

82 ALT_B-PLT_A-PLT_F-BA-e-1333
12.5 Percent determination
Percent determination allows weight display in percent, in relation to a reference
weight.
12.5.1 Entering the reference weight by weighing
 In weighing mode press MENU button. The master menu will be displayed.
 Use the navigation buttons  to select the menu i tem „Percent weigh.“.
 Confirm with the PRINT button, the currently set mode will be displayed.
 Use the navigation buttons 
to select setting „Automatic“.
 If using a weighing container, put this before pressing the PRINT button. The
taring process is automatically started.
 Press the PRINT key.
 Place the reference weight (=100 %) and press the PRINT button. As soon the
weighing value is stable, the determined weight will be taken over as reference
(100%). From now the balance is in percent determining mode.
 Place weighed goods, the result display will appear.
W% Weight of the sample in percentage
W Weight of the sample in grams
REF: Reference weight (100%)
When an optional printer is connected, the displayed value can be edited
using PRINT. Printout example (KERN YKB-01N):
07-09-11 11:14:57
Perc. 49.95 %
Weight of the sample in
percentage
Weight: 9.990 g
Weight of the sample in grams
Refer.: 20.000 g
Reference weight (100%)