KERN & SOHN ALT 250-4B - Manual (Page 54)

54 ALT_B-PLT_A-PLT_F-BA-e-1333
12.1 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts, the so-
called reference quantity. Counting is then carried out on the basis of the calculated
average piece weight.
As a rule:
The higher the reference quantity the higher the counting exactness.
12.1.1 Determine reference by weighing
 In weighing mode press MENU button. The master menu will be displayed.
 Use the navigation buttons  to select the menu item „Piece counting“.
 Acknowledge using PRINT button, the currently set reference quantity is
displayed.
 Use the navigation buttons  to select the desired setting.
Display Description
10 off Reference piece number 10
25 off Reference piece number 25
50 off Reference piece number 50
100 off Reference piece number 100
Manual Numerical input of reference weight, see chap. 12.1.2