KERN & SOHN ALT 250-4B - Manual (Page 74)

74 ALT_B-PLT_A-PLT_F-BA-e-1333
 The display for weighing the first component appears.
 Tare when using a weighing container. Start weighing. When the nominal value is
reached, right next to the capacity display „OK“ will appear.
If the nominal value is not reached (-
) or exceeded (+), „Err 10“ will appear on the
display after pressing the PRINT button. Correct the poured quantity.
 If the nominal weight is reached, press PRINT button. „Wait“ appears shortly
followed by „Tare“. Then the display passes to „W=0“ and the display for weighing
the second component appears.


 Weigh-in the displayed nominal value of the second component.